RTS KP-4016, Техническое руководство

Страница: 155 / 306

KP Series Basic Operation 155
Bosch Security Systems, Technical Manual
F.01U.304.914 Rev. 05
Input Bandpass Filters Group Box
The Input Bandpass Filters group box is used to enable bandpass filters which set a low and high frequency range where
frequencies within the two frequency points are passed and anything outside of the range is rejected.
IMPORTANT: OMNEO 3 through OMNEO 8 only appear when the Audio Package is purchased, otherwise, they do
not display.
To configure input bandpass filters , do the following:
1.
Select the Enabled column check box for the input you want to set a bandpass filter.
2.
From the Low Freq column drop down menu, select the low frequency you desire.
3.
From the High Freq column drop down menu, select the high frequency you desire.
FIGURE 86.
Filters Page – Input Bandpass Filters Group Box