RTS KP-4016, Техническое руководство

Страница: 192 / 306

192 KP-4016/5032 Menu System KP Series
Bosch Security Systems, Inc. Technical Manual F.01U.304.914 Rev. 05
To configure a preset frequency response for an output , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalization .
Inputs and Outputs appears in the panel display.
2.
Using the arrow buttons, select either Output .
3.
Press the SEL button .
Front Spkr and Rear Spkr appear in the panel display.
4.
Using the arrow buttons, select either Front Spkr or Rear Spkr .
5.
Press the SEL button .
Mode and Presets appear in the panel display.
6.
Using the arrow buttons, select Mode .
Disabled and Enabled appear in the panel display .
7.
Using the arrow buttons, select Enabled .
8.
Press the SEL button .
An arrow appears next to the selected option .
9.
Press the CLR button.
Mode and Presets appear in the panel display .
10.
Using the arrow buttons, select Presets .
11.
Press the SEL button .
Default, Hiss Reduction, and Rumble Reduction appear in the panel display.
12.
Using the arrow buttons, select Default , Hiss Reduction , Rumble Reduction , or Noise Reduction .
13.
Press the SEL button .
An arrow appears next to preset selected.
Adjustable 5-Band Equalization – Audio Package Only
Included in the purchased audio package, is an adjustable 5-band equalizer giving you the ability to adjust the low and
high frequency cutoff filters and the gain for each band. This feature is in addition to the preset equalization settings that
comes standard on the keypanel.
•
Band 1 has three options for low cut-off frequency
•
Bands 2, 3, and 4 have fixed frequencies
•
Band 5 has three options for high cut-off frequency independent of the low frequency setting
To adjust the low and high frequency cutoff filters for Inputs , do the following:
1.
Starting at the Audio Options|Advanced|Filters menu, select Equalizer .
2.
Press the SEL button .
Inputs and Outputs appears in the panel display.
3.
Using the arrow buttons, select Input .
4.
Press the SEL button .
Front Hdst, Front Mic, Matrix In, Rear Hdst, and Rear Mic appear in the panel display.
5.
Using the arrow buttons, select the input you want to adjust.
6.
Press the SEL button .
Frequencies, Gains, Mode and Presets appear in the panel display.
7.
Using the arrow buttons, select Frequencies .
1 2 3 4 5
low high low high low high low high low high
15.6Hz 125Hz 125Hz 500Hz 500Hz 2000Hz 2000Hz 8000Hz 8000Hz 12.6kHz
31.3Hz 15.8kHz
50.0Hz 20.0kHz