RTS KP-4016, Техническое руководство

Страница: 99 / 306

KP Series Basic Operation 99
Bosch Security Systems, Technical Manual
F.01U.304.914 Rev. 05
To take control of a target keypanel , do the following:
IMPORTANT: When you enter the Mirror menu looking for a target panel to Mirror, you can only see panels that are
locally scroll enabled (ie. if they aren’t in your scroll list, you won’t be able to mirror them).
1.
On the keypanel, starting at the Service menu, select Mirror .
2.
Press the SEL button .
A list of available target keypanels appear in the panel display .
3.
Using the arrow buttons, scroll to the target keypanel .
4.
Press the SEL button .
The Supervisor keypanel updates and displays the target keypanel’s image.
To exit Mirror mode on the keypanel , do the following:
1.
On the keypanel, starting at the Service menu, select Mirror .
2.
Press the SEL button .
The alpha of the target and Exit appear in the panel display .
3.
Using the arrow buttons or Aux Volume shaft encoder, select Exit .
4.
Press the SEL button .
The mirroring target and supervisor icons disappear and keypanels go back to normal operation.
Real-Time Control in AZedit (Control Package Only)
Real-Time Control allows you to make real-time (immediately applied) changes to intercom and keypanel volume controls as
well as muting keypanel microphones, switching headset focus, setting AFK, and enabling tone at selected keypanel ports.
Intercom Volume Controls
Intercom Volume Controls are used to adjust Crosspoint Listen, Party Line Listen, Port Input Gain, and Port Output Gain.
Adjustments to these different volumes can be done in real-time or modified and sent to the intercom at a later time.
There are two ways to adjust the intercom volume controls;
•
via the Port Volumes window
•
opening the individual gain adjustment screens
By default, intercom volumes are set at +0.0dB.
The range for Crosspoint Listen and Party Line Listen is Mute , -80dB to +6dB .
The range for the Port Input Gain and the Port Output Gain is -20dB to +20dB .