background image

KP-32 User Manual

KP-32 Menu System  51

Bosch Security Systems, Inc.

User Manual

 F.01U.193.253

Rev. 16

Service Menu, Matrix Out

This menu item allows the user to select between Normal or Hot Mic. In the Normal (default) setting audio from the Mic goes 
out to the Matrix when the talk key is latched. In the Hot Mic setting audio from the Mic goes out to the Matrix with out regard 
to the talk key’s state.

1.

Select

 Matrix Out

, then tap 

PGM

.

Normal displays.

2.

Press



 to select either Normal or Hot Mic.

3.

Tap 

PGM

.

4.

Tap 

CLR

 to exit.

5.

Run 

Service Menu, Save Cfg

, to store Matrix Out settings.

Service Menu, Mic Select

This menu item allows the user to select between the Panel and Headset Mic. In the Normal (default) setting, audio from the 
Panel Mic used. In the Hdst Only, setting audio from the Headset Mic is used.This is used to force the use of the headset 
microphone even when the keypanel’s speaker is being used.

1.

Select 

Mic Select

, then tap 

PGM

.

Normal displays.

2.

Press



 to select either Normal or Hdst Only.

3.

Tap 

PGM

.

4.

Tap 

CLR

 to exit.

5.

Run 

Service Menu, Save Cfg

, to store Mic Select settings.

Service Menu, Min Volume

This menu item allows the user to set the minimum volume level for both the keypanel speaker and the headset speaker(s). 
This is the minimum volume level available on the volume control located on the front panel of the KP-32. 

1.

Select

 Min Volume

, then tap 

PGM

.

Speaker displays.

2.

Press



 to select either Speaker or Headset.

3.

Tap 

PGM

4.

Press 



 or 



to increase or decrease the minimum volume level.

The range is -24 dB to -60 dB or full Mute.

5.

Tap 

PGM

.

6.

Tap 

CLR

 to exit.

7.

Run 

Service Menu, Save Cfg

, to store Min Volume settings.

Содержание EKP-32

























































































































Отзывы: