RTS EKP-32, Инструкция пользователя

Страница: 62 / 120

50 KP-32 Menu System KP-32 User Manual
Bosch Security Systems, Inc.
User Manual
F.01U.193.253 Rev. 16
Assigning an Input to Activate a Key Group
1.
Select Local GPIO , then tap PGM .

Input displays .
2.
Tap PGM .

GPI Inp #1 displays .
3.
Press

or

to display a different GPI input.
4.
Tap PGM to select a GPI input.
5.
Press

to select Group.
6.
Tap PGM .

By default, Group 1 displays. Press

or

to display a different group .
7.
Tap PGM .

An arrow appears to indicate that the group is now selected. For example, if you press PGM to select Group 1,
Group 1 displays.
8.
Tap CLR to exit, or BACK to back up and make more assignments.
9.
Run Service Menu, Save Cfg , to store local GPIO settings.
Removing an Input Assignment
1.
Select GPIO , then tap PGM .
2.
Press

or

if necessary to select Input.
3.
Tap PGM .
4.
Press

or

to display the GPI input that you want to remove.
5.
Tap PGM .
6.
Press

or to select Not Asgnd.
7.
Tap PGM .

Not Asgnd displays. The arrow indicates that Not Assigned is the new selection.
8.
Tap CLR to exit.
9.
Run Service Menu, Save Cfg , to store local GPIO settings.
Adding or Removing a GPI Output Key Assignment
1.
Select Local GPIO , then tap PGM .

Input displays .
2.
Press

to display Output.
3.
Tap PGM .

GPI Out #1 displays .
4.
Press

or

to display a different GPI output.
5.
Tap PGM to select a GPI output.

Tap Key displays. Also, if there is a key currently assigned to activate the selected GPI output, both LEDs for that key
light red. If there is no assignment, no LEDs are lit red.
6.
Tap an intercom key to add or remove the GPI output assignment.
7.
Tap CLR to exit, or BACK to back up and make more assignments.
8.
Run Service Menu, Save Cfg , to store local GPIO settings.