RTS EKP-32, Инструкция пользователя

Страница: 44 / 120

32 KP9X Series Keypad Programming KP-32 User Manual
Bosch Security Systems, Inc.
User Manual
F.01U.193.253 Rev. 16
3.
Press the talk or listen key from which you wish to copy.
4.
Press the talk or listen key to which you wish to copy.

The name of the key assignment should appear in the display above the key .
NOTE: If a key does not accept an assignment, the destination you are trying to assign may not have
scrolling enabled in AZedit. Or, the key that you are trying to assign may be restricted in AZedit.
Programming Key Assignments Using Alpha Scrolling
Alpha scrolling lets you scroll through a list of names of ports, party lines etc. in the Call waiting window. Once the desired
name is displayed in the window, you can copy it to a key. There are four scrolling modes: intercom, type, prefix and single-
step. The following example demonstrates their use.
Example: Assign a port to a key using the various scrolling modes.
1.
If the port is located in a remote intercom system, tap FUNC

or FUNC

to enter intercom scroll mode and
scroll up or down the list of intercoms in the Call waiting window. Otherwise, skip to step 2.
2.
When the desired intercom system name is displayed, or when making an assignment in the local intercom system,
tap
FUNC TYPE to activate type scroll mode.
3.
Use the

or

keys to locate the desired type of communication. In this example, you would scroll to “P-P”.
Abbreviations for types of communication:
P-P: Point-to-Point
PL: Party Line
IFB: IFB
SPCL: Special List
RLY: Relay or GPI output.
ISO: ISO
4.
When the desired type of communication is displayed, press PGM to retrieve the requested list.

Pressing PGM also exits type scroll mode and places the keypanel in single-step scroll mode. In some cases, WAIT
may display briefly while the requested list is being retrieved. N/A may display if there is no list. In this case, scrolling
is disabled in AZedit for all destinations of the selected type. For further information about scroll settings, search for
keyword “scroll” in AZedit help
.
NOTE: When the keypanel is in single-step scroll mode, it may take a long time to scroll to the desired
name (this is particularly true of point-to-point lists). To speed up the process, you can use prefix
scroll mode. Prefix scrolling mode scrolls through a list in alpha-numeric order, but displays only
the first occurrence of each two-character prefix. For example, if your intercom system had users
CAM1, CAM2, CAM3, DIR1, DIR2; prefix scrolling would display CAM1 followed by DIR1.
Once you locate a desired two-character prefix using prefix scroll, you can switch back to

single-step scrolling to make your final selection. Tap PREFIX to enter prefix scroll mode, then
use the

or

keys to scroll. When you locate a name with the same first two characters as the
name you are looking for, tap the PGM key to return to single-step scrolling mode.
5.
In single-step mode, use the

or

keys to make your final intercom port selection.
NOTE: If you cannot locate the destination that you are looking for, it may not have scrolling enabled in
AZedit.
6.
Copy the selected port to a talk or listen key:
7.
Tap COPY .
8.
Tap down on an intercom key to assign talk, or tap up to assign listen.