RTS EKP-32 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 120

background image

16 Basic Operation

KP-32 User Manual

Bosch Security Systems, Inc.

User Manual

F.01U.193.253

Rev. 16

Intercom Keys and Displays

Alphanumeric Display Indications for Intercom Keys

Upper Case Letters: Upper case letters indicate keys that have any kind of talk assignment, with or without a corresponding
listen assignment. Example: DIR1

Lower Case Letters:

Lower case letters indicate keys that have only a listen assignment. Example: dir1

.

Dashes

----

:

Dashes indicate a key that has no talk or listen assignment.

Flashing Alphanumeric Display:

This means the key is activated to talk to an IFB, ISO, or TIF.

NOTE:

The flashing alphanumeric display for TIF keys, remote IFB keys, and remote ISO keys can be disabled by

selecting the Don't generate tallies for TIF and trunk use check box in AZedit (Options menu|Intercom
Configuration|Options tab). This causes a first birthday.

Talk LED Indications

The talk LED is the lower LED for each key. The talk LED indications are as follows:

Continuous Green*

Talk is on and the keypanel operator can be heard at the destination.

Continuous Red Talk LED & Flashing Display Alpha (In-use)*

The key is off, but someone is talking to the destination. This indication is provided for any local PL, IFB, ISO, or TIF key. It
does not apply to remote IFB or ISO keys. This indication is provided so keypanels operators know when critical director
communications are occurring. If you activate the key, either of two things happen:

•

If you activate the key and the talk LED turns continuous green, this indicates that you and the other
keypanel operator are both talking to the destination.

•

IFB keys only: If the talk LED flashes red when an IFB key is activated, this indicates that the other
keypanel has a higher IFB priority and you cannot talk at this time.

NOTE:

The red in-use indication for TIF keys can be disabled in AZedit: In the AZedit Options menu, select Intercom

Configuration, then click on the Options tab. Select the Don't generate tallies for TIF and trunk use check box. Be
sure to send the change to the intercom system. This also disables the flashing alpha display when talking to
remote IFBs or ISOs as previously described. This causes a first birthday.

«
...
26
27
28
29
30
...
»

Содержание EKP-32

























































































































Отзывы:

Нет отзывов

Похожие инструкции для EKP-32

Бренд: 1byone Страницы: 17

Бренд: EAW Страницы: 2

Бренд: EAW Страницы: 2

Бренд: EAW Страницы: 2

Бренд: EAW Страницы: 2

Бренд: EAW Страницы: 20

Бренд: iHome Страницы: 17

FINISH-OUT MC111M

Бренд: M&S Systems Страницы: 2

Бренд: Pure Acoustics Страницы: 1

Бренд: Videx Страницы: 40

Бренд: Caliber Страницы: 18

Бренд: Alpine Страницы: 2

Бренд: The Fisher Страницы: 20

Бренд: Bticino Страницы: 25

Бренд: Eaton Страницы: 2

Бренд: Alcad Страницы: 28

Бренд: Audiovox Страницы: 35

Бренд: Kontron Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды