RTS EKP-32, Инструкция пользователя

Страница: 55 / 120

KP-32 User Manual KP-32 Menu System 43
Bosch Security Systems, Inc. User Manual F.01U.193.253 Rev. 16
5.
Tap CLR when finished.

Activating the master key should now cause it and all slave keys to activate. The LEDs for each key activate
according to the current key assignment for that key.
6.
Run Service Menu, Save Cfg , to store Key Group settings.
NOTE: Key group settings continue on keys even if you change the key assignments.
Clearing a key group
1.
Select Key Groups , and then tap PGM .

Group 1 displays. To select a different group, press

or

.
2.
Tap PGM .

Tap Master displays .
3.
Tap the current master key .

The LEDs remain lit red. After you tap the master key, Tap Slaves displays .
4.
Tap all the keys where the LEDs are lit green.

This turns the LEDs off.
5.
Tap CLR when finished.

The key group is now cleared.
6.
Run Service Menu, Save Cfg , to store the cleared key group setting.
Key Option Menu, Solo
A solo key causes all other keys to turn off when activated. You can assign one solo key.
1.
Select Solo , and then tap PGM .

Tap Key displays .
2.
Tap a key .

Both LEDs for the key lights red to confirm the assignment. Tap the key again if you made a mistake and want to
remove the assignment
.
3.
Tap CLR when finished.

Activating the solo key should now cause all other activated keys to turn off. The keys turn back on again when you
turn off the solo key.
4.
Run Service Menu, Save Cfg , to store the Solo setting.
NOTE: The solo option continues on a key even if you change the key assignment.
To remove the solo key option , do the following:
1.
Select Solo, then tap PGM .

The LEDs for the solo key are lit red.
2.
Tap the solo key to turn off the LEDs.
3.
Tap CLR to exit.

The solo key is now cleared.
4.
Run Service Menu, Save Cfg , to save the change.