RTS EKP-32, Инструкция пользователя

Страница: 77 / 120

KP-32 User Manual KP9X Keypad Sequence Quick Reference 65
Bosch Security Systems, Inc. User Manual F.01U.193.253 Rev. 16
KP9X Phone Operation
KP9X Hang-up Sequence
1.
Turn off the TIF talk key .
2.
On the keypad, tap PHONE-CLR .
3.
Turn the TIF talk key on , then off .

The TIF key talk and listen indicators turn off and the TIF off LED activate s.
KP9X Dial Sequence
1.
Activate the TIF listen key (listen LED green).

Make sure the TIF talk key is off (Talk LED off) .
2.
On the keypad, tap CLR-PHONE-PGM .
3.
Activate the TIF talk key (talk LED turns green).

The on LED at the TIF activates, and you should hear dial tone at the KP-32 .
4.
Dial the telephone number .

Digits scroll in the display above the TIF talk key. When the far end answers, you can dial additional digits (to access
a mail system or automated response system, etc.). When finished dialing, momentarily turn off the TIF talk key to
end dialing mode (talk LED turns red).
5.
Turn the TIF talk key on for conversation.
KP9X Redial Sequence
1.
Tap the PHONE key to activate dialing mode.
2.
Tap up on the TIF key to activate listen.
3.
Tap CLR 0 0 .

The last phone number is redialed .
4.
After the number has dialed, click the PHONE key to end dialing mode.

If the far end answers, tap down on the TIF key to activate talk .
5.
Use the KP9X hang-up sequence to hang up.
KP9X Autodial Sequences
Storing an Autodial Number in the TIF
1.
Tap the PHONE key.
2.
Tap the TIF talk key to latch it on.
3.
Using the keypad, dial the phone number you want to store.

The entire phone number sequence can have up to 30 digits .
NOTE: To insert one or more pauses anywhere in the dialing sequence, enter CLR CLR 9 9 for each pause.
4.
After dialing the telephone number, click CLR PGM , then enter a two-digit number (01, 02, etc. up to 32) you want
to use as the autodial number.
5.
After storing the autodial number, hang up using the KP9X hang-up sequence .