rtd cpuModule CME37786HX, Руководство пользователя

Страница: 69 / 122

CME37786HX RTD Embedded Technologies, Inc.
61
Primary Master/
Slave UDMA +, -,
<PgUp>,
<PgDn> Selects the UDMA mode to use:
• Auto
• Disable
External Prima-
ry Master/Slave
External Second-
ary Master/Slave +, -,
<PgUp>,
<PgDn> Selects the mode to access an IDE drive when using
an external hard drive controller. Some operating
systems have difficulty detecting the type of IDE
controller (PIO, DMA, UDMA) that is in the sys-
tem.
• PIO only - Disables DMA mode for this drive.
• DMA only - Use DMA mode or PIO mode.
• Auto (UDMA) - use highest mode supported by
the drive.
IDE block mode +, -,
<PgUp>,
<PgDn> Allows the IDE controller to use fast block mode to
transfer data to and from the hard disk.
• Enable -- IDE controller uses block mode
• Disable -- IDE controller does not uses block
mode
Init Display First +, -,
<PgUp>,
<PgDn> Selects the display adapter to use as the primary dis-
play. ISA display adapters will always be the prima-
ry.
• PCI Slot
• AGP (on board)
OnBoard Ether-
net +, -,
<PgUp>,
<PgDn> • Enable
• Disable
Onboard Serial
Port 1 +, -,
<PgUp>,
<PgDn> Serial port 1, connector CN7 settings:
• Disable -- Serial port not used
• Auto -- BIOS/OS controls operation
• 3F8h/IRQ 4 -- Address 3F8h and interrupt 4
• 2F8h/IRQ 3 -- Address 2F8h and interrupt 3
• 3E8h/IRQ 4 -- Address 3E8h and interrupt 4
• 2E8h/IRQ 3 -- Address 2E8h and interrupt 3
Mode +, -,
<PgUp>,
<PgDn> Select mode for onboard serial port 1
• RS-232 -- RS-232 driver/receiver enabled
• RS-422 -- RS-422 driver/receiver enabled
• RS-485 -- RS-485 driver/receiver enabled
Onboard Serial
Port 2 +, -,
<PgUp>,
<PgDn> Serial port 2, connector CN8 settings:
• Disable -- Serial port not used
• Auto -- BIOS/OS controls operation
• 3F8h/IRQ 4 -- Address 3F8h and interrupt 4
• 2F8h/IRQ 3 -- Address 2F8h and interrupt 3
• 3E8h/IRQ 4 -- Address 3E8h and interrupt 4
• 2E8h/IRQ 3 -- Address 2E8h and interrupt 3
Mode +, -,
<PgUp>,
<PgDn> Select mode for onboard serial port 2
• RS-232 -- RS-232 driver/receiver enabled
• RS-422 -- RS-422 driver/receiver enabled
• RS-485 -- RS-485 driver/receiver enabled
Table 33: Integrated Peripherals Setup Fields (Continued)