rtd cpuModule CME37786HX, Руководство пользователя

Страница: 58 / 122

CME37786HX RTD Embedded Technologies, Inc.
50
System
CLK -- Clock provides timing for all transactions on the PCI bus.
RST* -- Reset is used to bring PCI-specific registers to a known state.
Interrupts
INTA* -- Interrupt A is used to request Interrupts.
INTB* -- Interrupt B is used to request Interrupts only for multi-function devices.
INTC* -- Interrupt C is used to request Interrupts only for multi-function devices.
INTD* -- Interrupt D is used to request Interrupts only for multi-function devices.
Power Supplies and VIO
+5V -- +5 volt supply connected to PC/104 bus and power con5V supplies.
+12V -- +12 volt supply connected to PC/104 bus and power con12V supplies.
-12V -- -12 volt supply connected to PC/104 bus and power connector -12V supplies.
+3.3V -- +3.3 volt supply is an on-board converter which can deliver up to 2 amps.
VIO -- This signal typically is the I/O power to the bus drivers on a PCI bus card. B1 s3.3
or +5 volts to in3.3 or +5 volt signaling. The default is +3.3 volts. No other device except
this board should drive the VIO pin.