manualshive.com logo in svg

RSS M-300, Руководство пользователя

PaloAlto Networks M-300 - мощный межсетевой экран для вашей сети. Начните работу с помощью нашего бесплатного руководства по быстрому запуску. Скачайте его с нашего сайта для получения подробной информации о настройке и использовании этого продукта. manualshive.com.

Поделиться
Скачать
background image

 

3

 

001-50

 

●

 

Connect mains plug of this model to a mains socket 
outlet with a protective earthing connection.

.................................................................................................................................

 

002a

 

●

 

Do not open or perform any internal modifications on 
the unit.

.................................................................................................................................

 

003

 

●

 

Do not attempt to repair the unit, or replace parts 
within it (except when this manual provides specific 
instructions directing you to do so). Refer all servicing 
to your retailer, the nearest Roland Service Center, or an 
authorized Roland distributor, as listed on the “Information” 
page.

.................................................................................................................................

 

004

 

●

 

Never install the unit in any of the following locations:

• Subject to temperature extremes (e.g., direct 

sunlight in an enclosed vehicle, near a heating 
duct, on top of heat-generating equipment); or are

• Damp (e.g., baths, washrooms, on wet floors); or 

are

• Exposed to steam or smoke; or are

• Subject to salt exposure; or are

• Humid; or are

• Exposed to rain; or are

• Dusty or sandy; or are

• Subject to high levels of vibration and shakiness.

.................................................................................................................................

 

007

 

●

 

Make sure you always have the unit placed so it is 
level and sure to remain stable. Never place it on 
stands that could wobble, or on inclined surfaces.

.................................................................................................................................

 

008a

 

●

 

The unit should be connected to a power supply only 
of the type described in the operating instructions, or 
as marked on the rear side of unit.

.................................................................................................................................

 

008e

 

●

 

Use only the attached power-supply cord. Also, the 
supplied power cord must not be used with any other 
device.

.................................................................................................................................

 

009

 

●

 

Do not excessively twist or bend the power cord, nor 
place heavy objects on it. Doing so can damage the 
cord, producing severed elements and short circuits. 
Damaged cords are fire and shock hazards!

.................................................................................................................................

 

010

 

●

 

This unit, either alone or in combination with an 
amplifier and headphones or speakers, may be 
capable of producing sound levels that could cause 
permanent hearing loss. Do not operate for a long period of 
time at a high volume level, or at a level that is uncom-
fortable. If you experience any hearing loss or ringing in the 
ears, you should immediately stop using the unit, and consult 
an audiologist.

.................................................................................................................................

 

011

 

●

 

Do not allow any objects (e.g., flammable material, 
coins, pins); or liquids of any kind (water, soft drinks, 
etc.) to penetrate the unit.

.................................................................................................................................

Used for instructions intended to alert 
the user to the risk of injury or material 
damage should the unit be used 
improperly. 

* Material damage refers to damage or 

other adverse effects caused with 
respect to the home and all its 
furnishings, as well to domestic 
animals or pets. 

Used for instructions intended to alert 
the user to the risk of death or severe 
injury should the unit be used 
improperly. 

The 

●

 symbol alerts the user to things that must be 

carried out. The specific thing that must be done is 
indicated by the design contained within the circle. In 
the case of the symbol at left, it means that the power-
cord plug must be unplugged from the outlet. 

The      symbol alerts the user to important instructions 
or warnings.The specific meaning of the symbol is 
determined by the design contained within the 
triangle. In the case of the symbol at left, it is used for 
general cautions, warnings, or alerts to danger. 

The       symbol alerts the user to items that must never 
be carried out (are forbidden). The specific thing that 
must not be done is indicated by the design contained 
within the circle. In the case of the symbol at left, it 
means that the unit must never be disassembled. 

M-300_e.book 3 ページ ２０１０年４月２２日　木曜日　午前８時１７分

Содержание M-300

































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для M-300

Varimixer AR Series Operating Instructions Manual preview
AR Series
Бренд: Varimixer Страницы: 16
Preethi Blue Leaf Platinum Instruction Manual & Warranty Card preview
Blue Leaf Platinum
Бренд: Preethi Страницы: 16
Scarlett SC-045 Instruction Manual preview
SC-045
Бренд: Scarlett Страницы: 13
Voodoo Lab SPARKLE DRIVE User Manual preview
SPARKLE DRIVE
Бренд: Voodoo Lab Страницы: 2
Behringer BO100 User Manual preview
BO100
Бренд: Behringer Страницы: 2
audiophony H11041 User Manual preview
H11041
Бренд: audiophony Страницы: 24
Klarstein 10030085 Manual preview
10030085
Бренд: Klarstein Страницы: 31
Dash Everyday Instruction Manual preview
Everyday
Бренд: Dash Страницы: 17
Red Stamp RS2276HM Instruction Manual preview
RS2276HM
Бренд: Red Stamp Страницы: 4
Harman Soundcraft Si impact User Manual preview
Soundcraft Si impact
Бренд: Harman Страницы: 132
Doyon DOMIX45 User Instruction Manual preview
DOMIX45
Бренд: Doyon Страницы: 32
TH Custom Effects Pro-cessor 4.2 Quick Start Manual preview
Pro-cessor 4.2
Бренд: TH Custom Effects Страницы: 8
Honeywell HON 985B Operating And Maintenance Instructions Manual preview
HON 985B
Бренд: Honeywell Страницы: 15
Samson PL2404 Manual preview
PL2404
Бренд: Samson Страницы: 31
jobmate HCM550 Owner'S Manual preview
HCM550
Бренд: jobmate Страницы: 11
Russell Hobbs 14451 Instructions Manual preview
14451
Бренд: Russell Hobbs Страницы: 8
QSC MP-M Series Technical Notes preview
MP-M Series
Бренд: QSC Страницы: 2
TC Electronic VORTEX FLANGER User Manual preview
VORTEX FLANGER
Бренд: TC Electronic Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды