RSS M-300 Скачать руководство пользователя страница 126

Страница: 126 / 224

126

USB memory recorder

If more than one output-destination channel are exist, the
lowest number channel is shown.

The function buttons have the following operations:

By default, the input of the USB memory recorder are specified as
follows:

The RECORDER SOURCE SELECT popup is used to specify the
input.

Access the RECORDER screen.

g.ScrRecorderPlay.eps

Move the cursor to the L channel of the RECORDER
SOURCE SELECT popup button, and press [ENTER].

ig.ScrRcdrSrcSelectGuide.eps

The RECORDER SOURCE SELECT popup will appear.

Current source indication

This indicates the current input-source.

Input-source select buttons

Use these to select the input-source channel for the USB
memory recorder.

Move the cursor to the channel that you want to use as
the input-source, and press [ENTER] to select it.

Press [F8 (CLOSE)] to close the popup.

Make settings for the R channel in the same way.

By default, the output of the USB memory recorder are specified
as follows:

The RECORDER DESTINATION SELECT popup is used to specify
the output.

Access the RECORDER screen.

g.ScrRecorderPlay.eps

Move the cursor to the L channel of the RECORDER
DESTINATION SELECT popup button, and press [ENTER].

[F1 (

)]

Selects the previous WAV file.
Holding this down during playback rewinds
the WAV file being played.

[F2 (

)]

Selects the next WAV file. Holding this down
during playback fast-forwards the WAV file
being played.

[F3 (

)]

Plays the WAV file selected using the song list.

[F4 (REC)]

Puts the USB memory recorder into recording
standby.

[F5 (NAME EDIT)]

Accesses the NAME EDIT popup, where you can
edit the name of the WAV file (p. 127).

[F6 (DELETE SONG)]

Deletes the WAV file that’s selected in the song
list (p. 127).

[F7 (PLAY MODE)]

Cycles through the available playback modes.

[F8 (PEAK CLEAR)]

Clears the level meter’s peak hold or over
indication.

Specifying the input-source for the USB
memory recorder

Input

Input-source

RECORDER IN L

MAIN L

RECORDER IN R

MAIN R

Specifying the output-destination for the
USB memory recorder

Output

Output-destination

RECORDER OUT L

RECORDER OUT R

M-300_e.book 126 ページ２０１０年４月２２日　木曜日　午前８時１７分

Содержание M-300

































































































































































































































Результаты поиска

Содержание M-300

Отзывы:

Похожие инструкции для M-300

Бренды по названию

Популярные бренды

RSS M-300, Руководство пользователя

Результаты поиска

Содержание M-300

Отзывы:

Похожие инструкции для M-300

Бренды по названию

Популярные бренды