RPS 3EGF020333, Руководство пользователя

Страница: 24 / 90

WARNING!
Risk of injury due to falling components!
During assembly of components on the overhead
contact line, falling parts can cause severe injuries.
– Always perform overhead assembly work with
at least two persons.
– When working on subassemblies at height,
make sure that there are no persons below the
work range.
– Wear personal protective equipment when car-
rying out any work (protective clothing, safety
footwear, safety helmet, high-visibility vest, pro-
tective gloves where applicable).
– Secure components against falling.
WARNING!
Risk of injury due to heavy weight!
Lifting or moving parts with a high dead weight
could cause back pain and injuries.
– Do not lift heavy parts alone.
– Use appropriate lifting technology or lifting
tools.
WARNING!
Risk of fatal injury due to suspended loads!
During lifting procedures, loads may swing out and
fall down. This can cause severe to fatal injuries.
– Wear an industrial safety helmet for all work
with suspended loads.
– Never walk under or inside the swivel range of
suspended loads.
– Only move loads under supervision.
– Only used approved and tested hoists and
load-carrying equipment with sufficient load-
bearing capacity.
– Do not use torn or frayed load-carrying equip-
ment.
– Do not place load-carrying equipment such as
ropes and belts on sharp edges and do not
knot or twist them.
– Set down the load before leaving the work-
place.
Falling components
Heavy weight
Suspended loads
Safety
Dangers
14.09.2022 TracFeed ® SFA Electromechanical remote motor drive 24