Roxell HaiKoo, Инструкция по использованию и сборке

Страница: 79 / 90

ROXELL - 009 - 3509 HAIKOO -- INSTALLATION INSTRUCTIONS
III--29
TO INSTALL THE POULTRY PERCH GUARD
next to the control unit
every 3 feeder tubes when 3 or 4 pans/tube
every 2 feeder tubes when 1 or 2 pans/tube
FIGURE 79.
Position of the anchor brackets.
next to the hopper
3 feeder tubes
FIGURE 80.
Fix cable with
the clamp supplied
Click the cable into the upper cap of each pan up to
the next cable connection.
FIGURE 81.
START NEXT TO THE HOPPER
Make a double loop around the central notch of
the anchor bracket.
Unrollthecableforpoultryperchbetween2anchorbrack-
ets.
FIGURE 82. FIGURE 83.
Install a spring in the central notch of the second
anchor bracket.
Firmly tighten the cable.
Make a loop through the spring’s eye. Clamp.
Proceed the same
way for the next X tubes etc...
Cut the surplus cable.
EVERY X FEEDER TUBES (see fig. 79.)