Roxell HaiKoo, Инструкция по использованию и сборке

Страница: 60 / 90

HAIKOO -- INSTALLATION INSTRUCTIONS ROXELL - 009 - 0512
III--10
Determine the length of cable to be cut as follows :
-- Pull the cable downward under slight tension until it touches the tube.
-- Add 10cm.
-- Cut here.
Fix the suspension cable as follows :
FIGURE 16.
OPTIONAL :
As an option, you can suspend the line with cable 3/32” (00600205).
1
2 5
2
3
3
4
4
5
6
TO START, SUSPEND ALL CABLES
UNDER SLIGHT TENSION.
1
Wooden beam.
Beam Suspension cord
Main cable 5mm
Screw hook with pulley.
If H more than
3m.
(L = 3M)
FIGURE 17.
H
If winching--up height (H) exceeds 3m, place suspension hooks crosswise off the beam center line. So the cable clamps
will not touch the pulleys when you wind up the line.
(Max. 3,5M)
FIGURE 18.
You will not get any differences in level along the line as long as you respect
the distances at the first two cable attachments.
Cable
Feeder line.
25cm 15cm 25cm 25cm 25cm 15cm 15cm 15cm 0cm 0cm
If lifting height is more than 3m, you can install the central winch somewhat out of line. So the pulleys will not touch the
cable clamps. (Alternative system : see Fig. 17.)