Roxell HaiKoo, Инструкция по использованию и сборке

Страница: 11 / 90

ROXELL - 009 - 2111
HAIKOO -- INSTRUCTIONS FOR THE USER
I--5
USING THE SYSTEM FOR OLDER BIRDS
1. Suspend the lines at the correct height. You will obtain
optimum results when the birds can easily pick the feed
from the deepest part of the pan.
If birds necks rest on the edge of the pan, the feeder line
is adjusted too high.
On the contrary, if birds perch on the edge of the pan,
the line is adjusted too low.
You will prevent feed waste by keeping the pans at
the correct height !
The correct position of the feed level ring will be found
by experience.
You must consider feed composition, fat content and
type of birds.
The following feed level adjustments were derived from
practice :
-- free flowing feed : feed level ring in position 1, 2, 3
or 4
-- difficult flowing feed : feed level ring in position 5,
6, 7 or 8.
Optimum feeding results will be obtained with adequate
pan height, correct adjustment of the feed level ring and
use of a time clock
Have the pans emptied at least once a day. So the birds
will always get fresh feed.
2. If the birds have been without feed for a considerable
period, you must be very careful when filling up
the feeder lines.
The 100 kg. hopper should be filled before starting
the lines. So the transport system has a head start
to supply the hoppers.
Keep an eye on the feed supply.
Walk along the lines and gently disperse birds.
AT THE END OF A CROP
Have all pans emptied at the end of the crop. Also auger all
feed out of the tubes.
Winch up the complete installation to remove birds and
manure.
NEVER STAY UNDERNEATH WHEN
LOWERING OR WINCHING UP
THE CIRCUITS. STOP IMMEDIATELY AT
THE SLIGHTEST HITCH.
-- If you use heavy objects or machines when emptying
the house, you must avoid any damage to the system.
-- Winch up the circuits to a working height of about 1 m
for easy cleaning.
--
To remove the pan
:
in the correct order : (1 -- 2 -- 2).
FIGURE 1.
2
1
Order
2
FIGURE 2.
B
-- Pull the lip to the outside with one hand (A).
Push the pan downward with the other hand (B).
A
FIGURE 3.
A
B
Option: use tool nr.
09701814
.
FIGURE 4.
1