Roxell HaiKoo, Инструкция по использованию и сборке

Страница: 12 / 90

HAIKOO -- INSTRUCTIONS FOR THE USER
ROXELL - 009 - 2111
I--6
FIGURE 5.
-- Take the grill in both hands at the height of
the
arrows
(
2
) and open the grill.
The pan loosens completely from the grill.
2
2
FIGURE 6.
-- Now the pans can easily be
cleaned one after another with a
high pressure cleaner (Max. 100
Bar).
-- Push the pan back into the grill and click the clips one
after another over the pan edge.
-- If you want to replace a complete pan :
you can remove the top support
BY PRESSING
THE CENTRAL LIPS.
FIGURE 7.
REMEMBER TO COVER THE MOTORS WITH
WATERPROOF COVER !!
Motors and switches are insulated IP55, which means that
they resist splashing, but certainly not a high pressure
cleaner.
Take care that no water remains in the feed intake boot
(corrosion !!!) You can avoid this :
-- by loosening the tube clamp and turning the feed intake
boot with the opening downwards before you use
the high pressure cleaner, or
-- by hanging up the feed intake boot, so that all remaining
water flows away through the hole in the tube.
This method requires an extra suspension point next to
the 100 kg hopper or fixing the hopper suspension chain
to the feed intake boot.
The feeder pan , made of high
quality polypropylene
,
resists practically all cleansers and disinfectants. However,
if you want to use an aggressive product (1), you should
contact your supplier.
Put the
OPERATOR’S MANUAL
on the house wall at an
eye--catching spot.
(1) NB : Gaseous formaldehyde (formalin), liquid
caustic soda, hypochlorite or chlorine water, cresoles are
very corrosive and affect the system in no time !
WHAT TO DO BEFORE INSTALLING THE NEXT
BATCH OF BIRDS ?
Check operation of your system before placing the birds.
More particularly, take care that :
* all feed level tubes are at the same level (always keep
feed level as low as possible)
* all switches react promptly
* the control units are properly adjusted (low feed
level).
* the antiperch wire is still stretched (springs must be
stretched (about 6 cm )
* the time clock (when used) is programmed
* there are no leaks in the feed supply system
* there is no old, stale and/or tainted feed in the bin
* the feeder lines are well aligned. Especially the power
unit and the hopper must be well aligned and at
the same level.