Rowe StarLink DLW-1, Руководство по обслуживанию на поле и каталог запасных частей

Страница: 110 / 158

DLW-1 Phonograph
10-14 21822662
AUDIO VOLUME PRESETS
The Audio Volume Presets inputs are adjustable to
match signal levels from the Core Computer sound
card and other sources to the front-end inputs and
AVC circuitry of the Audio/Video Controller. If
an input is set too low, the Audio/Video Controller
may not produce enough volume or its AVC cir-
cuitry may not function properly. If set too high, the
yellow clip indicator LED(s) on the 1000 watt
amplifier will be off, but the sound will be distorted. All
inputs are factory set to 75%. The Sound Card input
should be left at 75, but other inputs may need to be
raised or lowered depending on the signal level of
sources connected to them.
The Audio Volume Presets outputs are adjustable to match the output level of the Audio/Video Controller to the
specified input level of different Power Amplifiers. The 60% factory setting is for the Rowe 1000 watt Extremely
Cool Audio Digital Power Amplifier. If it is set too high, the sound will be distorted at maximum volume or the music
may disappear from one or both channels. If set too low, the power amplifier may not produce enough sound at
maximum volume. The Rowe power amplifier has yellow LED clip indicators that blink at maximum volume if the
setting is too high. Occasional blinking is normal, but frequent blinking means it is set too high and the audio will
probably sound too distorted, and the Power Amplifier may shut down.
To change a value touch it, and the Keypad window will appear on the screen. Follow directions on page 30 for
using the Keypad and saving the value(s) you enter.
BACK
SAVE
UNDO
FOR STUDIO SOUND ONLY