Rotronic RMS-CONVERTER Скачать руководство пользователя страница 112

Страница: 112 / 126

RMS-Converter

E-M-RMS-Converter-V1_4.docx

Instruction Manual

Page 112 of 126

7.3.2

Network configuration of the device

The HL-LAN-INTERFACE is connected via Ethernet to the network.

To add the LAN-INTERFACE into the RMS, it is necessary to discover the individual network configuration of

the device as



DHCP active or fixed IP address.



Host name.

Only the HW4 can be used to get / edit this network information.

Note: Rotronic strongly recommends avoiding running the HW4 parallel to RMS (e.g. on a PC within

the same local Ethernet as for of the RMS Converter and the integrated devices). It will cause

timeouts, data gaps or other errors due to communication failures.

Note: The Digi Device Discovery Tool does not work for the HL-LAN-INTERFACE.

Note: Rotronic recommends to use fix IP addresses for the RMS Converter as well as for the devices.

The reason is the logging function of the RMS Converter in case of any interruption to the RMS.

Содержание RMS-CONVERTER































































































































Результаты поиска

Содержание RMS-CONVERTER

Отзывы:

Бренды по названию

Популярные бренды

Rotronic RMS-CONVERTER, Руководство пользователя

Результаты поиска

Содержание RMS-CONVERTER

Отзывы:

Бренды по названию

Популярные бренды