ROTOR INspider ROT117, Руководство пользователя

Страница: 45 / 64

45 First steps with ROTOR INspider
ES
EN
5. FIRST STEPS WITH YOUR ROTOR INspider
ROTOR becomes active INspider when applying a 2.5 kg force to it. This can be easily
achieved by riding a few meters. After two minutes of inactivity it enters hibernation mode.
To active it again, just apply the 2.5 kg force once again.
Note: the spider has an LED that can be observed from the right side of the crankset. The LED
is only visible if the dust cover protecting the charging connector is opened. The LED blinks
while the power meter is active in green, yellow or red light depending on the battery level.
Right after activation and during firmware updates, the LED color turns blue.
Manual_ _ES_EN 2INpower
LED