ROTOR INspider ROT117, Руководство пользователя

Страница: 54 / 64

54 Frequently asked questions
Manual_ _ES_EN 2INpower
Can I replace the battery?
ROTOR INspider uses a Lithium (Li-ion) battery. It has
3.7 V nominal tension and 290 mAh capacity. It can
complete 300 charges without damage, and a
complete charge lasts for 220 hours of use. This
means that one single battery should last for 66,000
hours without damage, enough time not to require
replacement during the complete lifetime of the
power meter. In case battery replacement is needed
you should contact your ROTOR dealer and they will
assist you.
If I usually connect to the running on
User Software
the computer, is the battery life still 220 hours?
If fast mode (or TORQUE 360) is active (only possible
with the
or the ROTOR Power app),
User Software
battery consumption is higher due to the higher
frequency of data emission required to represent the
graph. Always disconnect the power meter when
How can I clean my INspider? Are they waterproof?
INspider power meter is waterproof. It has been
tested under and has succesfully passed IPX7 level.
However, it is not recommended to clean your power
meter with high pressure and avoid direct water
impact on the seals. Do not use solvents or
degreasers; they can damage some power meter
closing the program to make sure fast mode is off.
elements.
How can I update the firmware of my power meter?
ROTOR sometimes offers
fi
rmware updates with
improvements.
The update process is wireless; to complete this you
will need to download the
from the
User Software
ROTOR website.
You can complete the process via ANT+ , for
TM
which you will need an ANT+ dongle, or via TM
How often do I have to update the firmware?
Bluetooth® Smart.
What happens if there is an error while updating the
If any error occurs during the updating process, you need
to try the update again until it successfully
fi
nishes. If the
If the
fi
rmware update is done via ANT+ , it is recommended
TM
to place the ANT+ dongle as close to the cranks as TM
possible for better radio signal reception.
firmware?
update process begins and the program detects any
problem, the process will restart a maximum of 5 times
before cancelling the update.