Roth BW/H Komfort HE, Руководство для специализированного ремесленника

Страница: 67 / 80

67
en
15 User code
The access to some adjustment values can be restricted via a user code (customer).
1. Installer 0262 (Factory setting)
All menus and adjustment values are shown and all values can be altered.
2. Customer 0000
The installer level is not shown, adjustment values can be changed partly. For safety
reasons, the user code should generally be set to the customer code before the
controller is handed to the customer!
Î
In order to restrict the access, enter 0000 in the menu item User code.
16 In- / outputs
In the In- / outputs menu, external modules can be registered, sensor offsets can
be adjusted and relay outputs can be confi gured.
16.1 Modules
In this menu, up to 2 external modules can be registered.
All modules connected and acknowledged by the controller are available.
Î To register a module, select the corresponding menu item by pressing button
➄
.
The checkbox indicates the selection. If a module is registered, all its sensor inputs
and relay outputs will be available in the corresponding controller menus.
In- / outputs / Modules
Adjustment channel Description Adjustment range / selection Factory setting
Module 1 … 2 Registering external modules - -