Roth BW/H Komfort HE, Руководство для специализированного ремесленника

Страница: 45 / 80

45
en
9 Arrangement
In this menu, all adjustments for the non-solar part of the arrangement can be
made.
A range of optional functions can be selected and adjusted.
9.1 optional functions
In this menu, optional functions can be selected and adjusted for the arrangement.
By selecting Add new function, different pre-programmed functions can be se-
lected. The optional functions are available as long as free relays are available.
When a function is selected, a sub-menu opens in which all adjustments required
can be made.
With this sub-menu, a relay and, if necessary, certain system components can be
allocated to the function.
The menu item Relay selec. is available in all optional functions. Therefore, it will
not be explained in the individual function descriptions.
With this menu item, a relay can be allocated to the function. All free relays are
available for selection.
If Free is selected, the function will run normally in the software but will not
operate a relay.
In the sub-menu Controller, all free relays of the controller are displayed. If ex-
ternal modules are connected and registered, their relays will be displayed in cor-
responding sub-menus.
When a function has been selected and adjusted, it will appear in the opt. func-
tions menu above the menu item Add new function.
This allows an easy overview of functions already activated.
An overview about which sensor has been allocated to which component and
which relay has been allocated to which function is given in the Status / Service
menu.
At the end of each optional function sub-menu, the menu items Function and
Delete function are available.