Roth BW/H Komfort HE, Руководство для специализированного ремесленника

Страница: 33 / 80

33
en
If Free is selected, the function will run normally in the software but will not
operate a relay.
In the sub-menu Controller, all free relays of the controller are displayed. If ex-
ternal modules are connected and registered, their relays will be displayed in cor-
responding sub-menus.
When a function has been selected and adjusted, it will appear in the opt. func-
tions menu above the menu item Add new function.
This allows an easy overview of functions already activated.
An overview about which sensor has been allocated to which component and
which relay has been allocated to which function is given in the Status / Service
menu.
At the end of each optional function sub-menu, the menu items Function and
Delete function are available.
With the menu item Function, an optional function already selected can be tem-
porarily deactivated or re-activated respectively. In this case, all adjustments remain
stored, the allocated relays remain occupied and cannot be allocated to another
function.
If the menu item Delete function is confi rmed by pressing button
➄
, a safety
enquiry appears. The setting can be changed between Yes and No by pressing
buttons
❷
and
❹
. If Yes has been selected and confi rmed by pressing button
➄
,
the function will be deleted and become available under Add new function again.
The corresponding relays are available again.