Roth BW/H Komfort HE, Руководство для специализированного ремесленника

Страница: 59 / 80

59
en
10.3 optional functions
In this menu, optional functions can be selected and adjusted for the heating part
of the arrangement.
By selecting Add new function, different pre-programmed functions can be se-
lected. The optional functions are available as long as free relays are available.
When a function is selected, a sub-menu opens in which all adjustments required
can be made.
With this sub-menu, a relay and, if necessary, certain system components can be
allocated to the function.
The menu item Demand is available in all optional heating functions. Therefore, it
will not be explained in the individual function descriptions.
With this menu item, a backup heating demand relay can be allocated to the func-
tion. All free relays are available for selection.
If Free is selected, the function will run normally in the software but will not
operate a relay.
In the sub-menu Controller, all free relays of the controller are displayed. If ex-
ternal modules are connected and registered, their relays will be displayed in cor-
responding sub-menus.
When a function has been selected and adjusted, it will appear in the opt. func-
tions menu above the menu item Add new function.
This allows an easy overview of functions already activated.
An overview about which sensor has been allocated to which component and
which relay has been allocated to which function is given in the Status / Service
menu.
At the end of each optional function sub-menu, the menu items Function and
Delete function are available.
With the menu item Function, an optional function already selected can be tem-
porarily deactivated or re-activated respectively. In this case, all adjustments remain
stored, the allocated relays remain occupied and cannot be allocated to another
function.