Roth BW/H Komfort HE, Руководство для специализированного ремесленника

Страница: 66 / 80

66
en
14 Manual mode
In the Manual mode menu, the operating mode of all relays in the controller and
in connected modules can be adjusted.
All relays are displayed in numerical order, fi rst those of the controller, then those
of the individual modules connected. Modules are listed in numerical order.
In the menu item All relays…, all relays can be switched off (Off) or set to auto-
matic mode (Auto) at once:
Off = Relay is switched off (manual mode)
Auto = Relay is in automatic mode
The operating mode can be selected for each individual relay, too. The following
options are available:
Off = Relay is switched off (manual mode)
Min. = Relay active with minimum speed (manual mode)
Max. = Relay active at 100 % speed (manual mode)
Auto = Relay is in automatic mode
Note:
After service and maintenance work, the relay mode must be set back to
Auto. Otherwise normal operation will not be possible.
Manual mode
Adjustment channel Description Adjustment range / selection Factory setting
Relay 1 … X Operating mode selection Max., Auto, Min., Off Auto
All relays… Operating mode of all relays Auto, Off Off
Note:
Because of the increasing size of the data packets, the remaining logging
time does not decrease linearly. The data packet size can increase, e. g.
with the increasing operating hours value.
Storing controller adjustments
Î To store the controller adjustments on an SD card, select the menu item Save
adjustments.
While the adjustments are being stored, fi rst Please wait, then Done! will be
indicated on the display. The controller adjustments are stored as a .SET fi le on
the SD card.
Loading controller adjustments
Î To load controller adjustments from an SD card, select the menu item Load
adjustments.
The File selection window is indicated.
Î Select the desired .SET fi le.
While the adjustments are being loaded, fi rst Please wait, then Done! will be
indicated on the display.
Formatting the SD card
Î
Select the menu item Format card.
The content of the card will be deleted and the card will be formatted with the
FAT fi le system.
Note:
To safely remove the SD card, always select the menu item Remove
card… before removing the card.
SD card
Adjustment
channel
Description
Adjustment range /
selection
Factory setting
Remove card… Safely remove card - -
Save adj. Save adjustments - -
Load adj. Load adjustments - -
Logging interval Data logging interval 00:01 … 20:00 (mm:ss) 01:00
Logging type Logging type Cyclic, Linear Linear
Format card Start formatting memory card - -