Rotex RKHH2E200AAV33, Руководство по установке

Страница: 6 / 42

Installation Manual
6
RKHH2E-(P)AAV33
ROTEX Domestic Hot Water Heat Pump
2018.8
1.3 For the installer
1.3.1 General
If you are not sure how to install or operate the unit,
contact your dealer.
NOTICE
Improper installation or attachment of
equipment or accessories can result in
electric shock, short-circuit, leaks, fire or
other damage to the equipment. Only use
accessories, optional equipment and
spare parts made or approved by Daikin
.
WARNING
Make sure installation, testing and applied materials
comply with applicable legislation (in addition
to the instructions described in the Daikin
documentation).
CAUTION
Wear adequate personal protective
equipment (protective gloves, safety
glasses, …) when installing, maintaining
or servicing the system.
DANGER: RISK OF BURNING
•
Do NOT touch the refrigerant piping,
water piping or internal parts during and
immediately after operation. These may
be too hot or too cold. Wait for the parts
to return to their normal temperature. If
you need to touch them anyway, wear
protective gloves.
•
Do NOT touch any accidental leaking
refrigerant.
WARNING
Provide adequate measures to prevent the unit
from being used as a shelter by small animals.
Small animals that come into contact with
electrical parts can cause malfunctions, smoke
or fire.
CAUTION
Do NOT touch the air inlet or aluminium fins
of the unit .
NOTICE
•
Do NOT place any objects or equipment
on top of the unit.
•
Do NOT sit, climb or stand on the unit.
NOTICE
Works executed on the outdoor unit are
preferably carried out under dry weather
conditions to avoid water ingress
.
In accordance with the applicable legislation, it may be
necessary to provide a logbook with the unit
containing at least: information on maintenance,
repair work, results of tests, stand-
by periods, …
Also, following information (at least) must appear on the
unit where it can be read:
•
Instructions for shutting down the system in case
of an emergency
•
Name and address of fire department, police and
hospital
•
Name, address and day and night telephone
numbers for obtaining service
In Europe, EN378 provides the necessary guidance for
this logbook.
1.3.2 Installation site
•
Provide sufficient space around the unit for
servicing and air circulation.
•
Make sure the installation site withstands the unit's
weight and vibration.
•
Make sure the area is well ventilated. Do NOT
block any ventilation openings.
•
Make sure the unit is level.
Do NOT install the unit in the following places:
•
Potentially explosive atmospheres.
•
In areas with machinery that emits
electromagnetic waves. Electromagnetic waves
may disturb the control system and cause the
equipment to malfunction.
•
In areas with a risk of fire due to the leakage of
flammable gases (example: thinner or gasoline),
carbon fibre, ignitable dust.
•
In areas where corrosive gas (such as sulphurous
acid gas) is produced. Corrosion of copper pipes
or soldered parts may cause the refrigerant to
leak.