Rotex RKHH2E200AAV33, Руководство по установке

Страница: 17 / 42

RKHH2E-(P)AAV33
ROTEX Domestic Hot Water Heat Pump
2018.8
Installation manual
17
6 Installation and
connections
WARNING!
Installation, commissioning and maintenance
of the device must be performed by
qualified and authorised personnel. Do
not attempt to install the device yourself.
6.1
Preparation of the installation
site
The installation of the device must be carried out in a
suitable place in order to allow the normal use and
adjustment operations, together with ordinary and
extraordinary maintenance to be performed.
It is therefore important to allow for the necessary
working space. The dimensions are shown in Fig. 2.
Fig. 2
– Minimum spaces
Model
X1 X2 X3 Y1
mm Mm mm mm
RKHH2E200AAV33
RKHH2E260AAV33
RKHH2E260PAAV33
650 650 200 300
Moreover, the premises must:
•
Have adequate water and power supply lines;
•
Be available and ready for connection to the
condense drain;
•
Be available and ready with adequate discharge
pipes in case of damage caused to the boiler or
actuation of the safety valve or breakage of
pipes/connections;
•
Have containment systems in case of serious
water leaks;
•
Be sufficiently lit (where appropriate);
•
Be larger than 20 m
3
;
•
Be frost-proof and dry.
WARNING!
In order to avoid the propagation of
mechanical vibrations, do not install the
equipment on floor slabs with wooden
beams (e.g. in lofts).
6.2 Ventilation connection
In addition to the space indicated in paragraph 0, the
heat pump requires adequate ventilation.
It is necessary to create a dedicated air duct as
indicated in Fig. 3.
Fig. 3
– Example of an air outlet duct
Moreover, it is important to ensure adequate ventilation
of the premises where the equipment is to be
installed.
An alternative solution is illustrated in Fig. 4 and 5,
where a second duct draws air in from outside
instead of directly from inside the premises.
Fig. 4
– Example of dual duct connection
X3
Y1
X2 X1
Ou
tsid
e
Ou
ts
id
e

≥500 kg