Rotec AEROSPORT R2800 Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 87

Rotec AEROSPORT R2800 Скачать руководство пользователя страница 41

ROTEC AEROSPORT | 41

www.RotecAerosport.com

OIL COOLER

GENERAL RECOMMENDATION

Not Required.

All testing conducted by Rotec Aerosport have permitted the exclusion of an oil cooler.

•

Shell Advance VSX4 10W-40 for cold conditions where the oil temp will be lower than 120 C

•

Shell Advance VSX4 15W-50 for standard operating conditions where the oil temp will be above 120 C

•

Castrol GPS (4s stroke motorcycle oil) 10W-50

ENGINE OIL RECOMMENDATIONS

Cooling:

Not Required

Filter:

Use auto type (supplied).

Grade:

15W - 50

Brands:

Oils that contain additives required by the Rotec PSRU, include but are not limited to:
AeroShell Multigrade W 15 W 50
AeroShell Oil Sport Plus 4 (alternative option, used by Rotax 912 engines)
Shell ADVANCE VSX 4 10W-40 for cold conditions where oil temp will be lower than

120C
Shell ADVANCE VSX 4 15W-50 for standard operating conditions where oil temp will

be above 120C
Castrol GPS (4 stroke bike oil) 10W-50*

NOTE:

* As a general guide, Rotec use Castrol GPS 10W-50 grade oil for all testing year round in Melbourne (Australia)

which falls into the Temperate zone 10-40C.

OIL SPECIFICATIONS

OIL TYPES

OIL CHANGES 25 HOURLY

Rotec recommends using a high quality, major brand, 4 stroke motorcycle oil with gear additives and “SF” or “SG” API

classification.

The gear additives are required to withstand the high stresses in the reduction gearbox. High performance bike speci-

fication is recommended.

Users running leaded AVGAS more than 30% of the time should only use semi-synthetic oils, since a full-synthetic oil

can sludge and create lead residues.

WARNING:

USERS SHOULD

STRICTLY

CHANGE OIL AND

BOTH

(2) OIL FILTERS EVERY 25 HOURS. THIS WILL KEEP ENGINE

CLEAN, FREE OF CORROSION, AVOID GALLERY BLOCKAGES AND KEEP OIL LUBRICITY EFFECTIVE.

NOTE:

As a general guide, Rotec uses Castrol GPS 10W-50 grade for all year round testing in Melbourne, which falls into the

Temperate 10-40C zone.

«
...
39
40
41
42
43
...
»

Содержание AEROSPORT R2800
























































































Отзывы:

Нет отзывов