Installation
16
AYC-B7661 Installation Manual
3.
Splice the controller pigtail wires to the corresponding PS-x25
secured power supply’s wires (see Table 2) and cover each
connection.
Table 2: Wiring the Unit as a Controller
Controller
Color
Functionality Note
5~16 VDC
Red
+DC Input
Wired to the PS-x25
Shield/ Ground
Black
Ground
Wired to the PS-x25
C 1
White
Communication
Wired to the PS-x25
C 2
Green
Communication
Wired to the PS-x25
AUX. IN
Brown
Auxiliary Input
Wired to input
Attach the cable shield wire on the unit to an earth ground (best).
You can also attach it to a signal ground connection at the panel or
power supply end of the cable. This configuration is best for
shielding the controller cable from external interference.
4.
Trim and cover all conductors not used.
5.
To connect the unit to the desired power supply option, refer to
the relevant wiring diagrams that follow.