Installation
14
AYC-B7661 Installation Manual
The unit can also be mounted using strong epoxy glue. After
application, firmly hold the unit in place until the glue dries.
11.
Carefully re-attach the snap-off front cover of the unit and secure
the case security screw at the bottom using the security hex key.
3.2
Wiring Instructions
3.2.1
Wiring the Unit as a Reader
If you connect the unit to a standard access control unit, it
automatically functions as a reader.
Figure 3: Wiring Layout for Reader Configuration
The AYC-B7661unit is connected with an 8-wire, 46-cm (18”) cable.
To connect the unit as a reader (to a controller):
1.
Prepare the unit's cable by cutting the cable jacket back 3.2 cm
(1¼”) and strip the wire 1.3 cm (½”).
2.
Prepare the controller cable by cutting the cable jacket back 3.2
cm (1¼”) and strip the wire 1.3 cm (½”).
3.
Splice the unit’s pigtail wires to the corresponding controller
wires (Table 1) and cover each connection.