Installation
AYC-B7661 Installation Manual
13
6.
At the bottom of the unit’s case, unscrew and remove the security
screw (see Figure 2), using the supplied security hex-key
screwdriver.
Figure 2: AYC-B7661 – Removing the Top Cover
7.
Carefully remove the snap-off front cover of the unit to reveal
two screw holes.
8.
Insert the unit’s cable wire into the cable hole and move the unit
flush with the wall.
9.
Using the two mounting screws, screw the unit to the wall
through the two wall plugs.
10.
Route the cable from the unit to the:
Controller – when configuring as a reader (Section
3.2.1)
PS-x25 power supply – when configuring as a controller
(Section
3.2.2)