manualshive.com logo in svg

Ross Ultricore RCP-ME, Руководство пользователя, Страница: 92 / 98

Поделиться
Скачать
Ross Ultricore RCP-ME Скачать руководство пользователя страница 92

92 • DashBoard Interface Overview

RCP-ME User Guide (v4.0)

Destination/Source Label Access Tabs

The Label Access tabs allow or deny a panel access to a label. Even if a button is assigned with a specific source or 
destination label, and if the label access is denied (the box is unchecked), then a “

NoAcc

” message is displayed if 

the button is pressed.

Table 16.11

 summarizes the options displayed in the 

Destination/Source Label Access

 tabs.

Bottom Toolbar

The bottom toolbar provides the following buttons:

•

Refresh

 — click this button to revert to the configuration previously sent to the RCP-ME. The RCP-ME 

Connection Editor will display the last settings that were sent to the RCP-ME via the Send Configuration button.

•

Send Firmware

 — click this button to open a file browser to select a software/firmware file to send to the 

RCP-ME.

•

Send Configuration

 —click this button to upload the settings to the RCP-ME. All configuration items become 

active only after uploading.

•

Reboot

 — click this button to reboot the RCP-ME. This function does not clear the RCP-ME settings.

•

Close

 — click this button to close the RCP-ME Connection Editor in DashBoard.

Send Configuration Dialog

The 

Send Configuration 

dialog is used to apply the changes made in DashBoard to the hard panel. The dialog is 

divided into two areas:

• a column that lists the tabs that have unsent parameters
• the Select Devices list that enables you to specify which panels to send the new configuration to.

This dialog is displayed when the 

Send Configuration 

button is clicked on the Panel Config interface. 

Figure 16.8  Example of a Send Configuration Dialog

Table 16.11  Destination and Source Label Access Tabs

Item

Parameters

Description

# (read only) 

#

table row number

Label (read-only)

<text>

displays the source or destination label as defined 
by the Ultricore database or the Input/Output 
assigns tab (if no Ultricore system)

Enabled

Enable/disable access for this label

Содержание Ultricore RCP-ME



































































































Отзывы:

Нет отзывов