Ross Ultricore RCP-ME, Руководство пользователя, Страница: 42 / 98

42 • Menus RCP-ME User Guide (v4.0)
› Fallback Off — After a button in the menu is pressed, the RCP-ME remains on the menu. If you select
Fallback Off, the corresponding value in the Fallback Menu column is ignored. You must provide extra
menu navigation buttons within the menu so that you can exit from the menu.
› First Menu — After a button in the menu is pressed, the RCP-ME returns to the first menu (Menu 0 in
the Menu Name column). If the button that is pressed is assigned as a menu link or a menu navigation
button, then the RCP-ME goes to that menu.
› Previous Menu — After a button in the menu is pressed, the RCP-ME returns to the menu that it was on
prior to the current menu. If the button that is pressed is assigned as a menu link or a menu navigation
button, then the RCP-ME goes to that menu.
› Specified Menu — After a button in the menu is pressed, the RCP-ME returns to the menu specified in
the Fallback Menu column. If the button that is pressed is assigned as a menu link or a menu navigation
button, then the RCP-ME goes to that menu.
6. If you have selected Specified Menu as the fallback mode, enter the specific menu number in the Fallback
Menu column.
7. Define the next menu in the Menu Name column below the menus that you have defined previously. Repeat
steps 5 to 6 until you have defined all of the menus that you want to use.
8. Send the current configuration file to the device (see “ To send the current configuration to a panel ” on
page 74).

When you enter the menu page on the RCP-ME, any static labels that you have placed in the buttons may no
longer reflect the function of the button.
Assigning a Menu Link Button
A menu link enables access to a predefined menu via a single button press. You can assign a predefined menu to a
button on the RCP-ME.
For More Information on...
• how to set up a menu see “ To set up a menu ” on page 41.
To assign a menu to a button
1. Open the RCP-ME Panel Config interface (see “ To open the RCP-ME Panel Config interface ” on page 22).
2. On the simulated RCP-ME, select the button that you want to use for the menu link.
The Button dialog opens.
3. In the Button list, select Menu Link .
4. In the Value field, use the list to select the menu you want to assign to the button.
5. Close the Button dialog.
The simulated RCP-ME in DashBoard shows the menu on the selected button. For example, Menu 3 .
6. Click the Menu list below the simulated RCP-ME and select the menu that you have just assigned.
7. Assign functions to the buttons in this menu (see “ To assign a function to a button ” on page 46).
For example, if this menu is for the purpose of selecting a destination, assign the buttons as destinations. You
may choose to have this destination menu fall back to a source menu.
8. Send the current configuration file to the device (see “ To send the current configuration to a panel ” on
page 74).
Assigning Menu Navigation Button
If you have multiple menus assigned in the RCP-ME, you may want to include some navigation buttons to enhance
movement through the menus.