Ross Ultricore RCP-ME, Руководство пользователя, Страница: 63 / 98

RCP-ME User Guide (v4.0) Protects and Locks • 63
3. In the Configuration section, select the Panel Locked check box.
4. Send the current configuration file to the device (see “ To send the current configuration to a panel ” on
page 74).
The RCP-ME is locked.

If a panel
LOCK
button is assigned, it can be pressed to unlock the RCP-ME.
To lock the RCP-ME using a panel lock button
• Press the panel
LOCK
button.
The panel
LOCK
button illuminates. A brief KEY LOCK message is shown on the screen.
Every button on the RCP-ME becomes inactive except for the panel
LOCK
button.
To unlock the RCP-ME using a panel lock button
• If you want to unlock the RCP-ME, press the panel
LOCK
button.
The panel
LOCK
button switches off. A brief KEY UNLOCK message is shown on the screen.
To lock the RCP-ME using a protect button
• Hold the
PROTECT
button for 3 seconds.
A brief KEY LOCK message is shown on the screen.
If a panel
LOCK
button is assigned to the RCP-ME, this button illuminates.
Every button on the RCP-ME becomes inactive, except for the
PROTECT
button and panel
LOCK
button, if
assigned.
To unlock the RCP-ME when locked by a protect button
• If the RCP-ME is locked using a protect button and you want to unlock it, hold the protect button or press the
panel lock button, if assigned.
A brief
KEY UNLOCK message is shown on the screen.

The
PROTECT
button does not illuminate.
Protecting a Destination
You can use a protect button to prevent switching of critical crosspoints by others. The protect function ensures that
the selected destination can only receive the selected source across the selected levels. Once protected, the selected
levels on a destination cannot be switched by other remote control panels (or by the same remote control panel if
Block All Panels is selected). The source is not protected and can be freely routed to other destinations if required.
You can protect any number of destinations.
You can set the extent of protection that is used via DashBoard, such as protected against other remote control
panels or protected against all remote control panels (see “
Locking an RCP-ME ” on page 62).
To protect a destination
1. Make the switch.
2. Press the
PROTECT
button.
The
PROTECT
button and the protected crosspoint are illuminated. The screen indicates that a protect is in
place by showing the protection indicator at the bottom left of the screen.
Figure 10.1 Protected Crosspoint and Protection Indicator
1 2 3 4
SRC: Server 2
DST: Monitor
L