Ross Ultricore RCP-ME Скачать руководство пользователя страница 79

Страница: 79 / 98

RCP-ME User Guide (v4.0)

Monitoring • 79

To check the firmware version of a RCP-ME using DashBoard

1. Launch

DashBoard

2. In the

Basic Tree View

, expand the node for the required RCP-ME.

3. Double-click the

Panel Config

node.

The

Panel Config

interface opens.

The firmware version is shown in the

Version

field located at the top of the interface.

Upgrading the Firmware Version

Firmware upgrade files can be obtained by contacting Ross Video Technical Support.

To upgrade the RCP-ME firmware

1. Launch

DashBoard

2. In the

Basic Tree View

, expand the node for the required RCP-ME.

3. Double-click the

Panel Config

node.

The

Panel Config

interface opens.

4. Click

Send Firmware

The

Open

file dialog opens.

5. Navigate to where you have stored the firmware file and select it.

6. Click

Open

The

Confirm Upload

dialog opens.

7. Click

Continue

A progress bar displays. When the upload has completed, a confirmation dialog opens.

8. Click

9. Click

Reboot

to restart the device and activate the new firmware.

Troubleshooting the Upgrade

If you encounter problems when upgrading your RCP-ME, verify the following:

• Your network settings on the RCP-ME are valid.
• The ethernet cable is properly connected.
• The file you are attempting to load is the correct file for the panel you are upgrading.

Содержание Ultricore RCP-ME



































































































Результаты поиска

Содержание Ultricore RCP-ME

Отзывы:

Ross Ultricore RCP-ME, Руководство пользователя, Страница: 79 / 98

Результаты поиска

Содержание Ultricore RCP-ME

Отзывы: