Ross UltraChrome HR Скачать руководство пользователя страница 4

receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories specified by the

manufacturer.

12.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

13.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as when the

power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain

or moisture, does not operate normally, or has

been dropped.

14.

Do not expose this apparatus to dripping or

splashing, and ensure that no objects filled with

liquids, such as vases, are placed on the apparatus.

15.

To completely disconnect this apparatus from the

AC Mains, disconnect the power supply cord plug

from the AC receptacle.

16.

The mains plug of the power supply cord shall

remain readily operable.

17.

Warning: 

 Indoor Use: To reduce the risk

of fire or electric shock, do not expose this

apparatus to rain or moisture.

18.

The safe operation of this product requires that

a protective earth connection be provided. A

grounding conductor in the equipment's supply

cord provides this protective earth. To reduce

the risk of electrical shock to the operator and

service personnel, this ground conductor must be

connected to an earthed ground.

19.

Warning: 

 This apparatus, when equipped

with multiple power supplies, can generate

high leakage currents. To reduce the risk of

electric shock, ensure that each individual

supply cord is connected to its own separate

branch circuit with an earth connection.

20.

CAUTION: 

 These service instructions are

for use by qualified service personnel only.

To reduce the risk of electric shock, do

not perform any servicing other than that

contained in the operating instructions unless

you are qualified to do so.

21.

Service barriers within this product are intended

to protect the operator and service personnel from

hazardous voltages. For continued safety, replace

all barriers after servicing.

22.

Certain parts of this equipment still present a

safety hazard with the power switch in the OFF

position. To avoid electrical shock, disconnect all

A/C power cords from the chassis' rear appliance

connectors before servicing.

23.

This product contains safety critical parts, which,

if incorrectly replaced, may present a risk of fire

or electrical shock. Components contained within

the product's power supplies and power supply

area are not intended to be customer-serviced and

should be returned to the factory for repair.

24.

To reduce the risk of fire, replacement fuses must

be the same type and rating.

25.

Use only power cords specified for this product

and certified for the country of use.

26.

The safe operation of this equipment requires

that the user heed and adhere to all installation

and servicing instruction contained within the

equipment's Setup Manuals.

27.

Warning: 

 This product includes an  “

Ethernet Port ”  which allows this product to

be connected to a local area network (LAN).

Only connect to networks that remain inside

the building. Do not connect to networks that

go outside the building.

28.

CAUTION: 

 This apparatus contains a

Lithium battery, which if replaced incorrectly,

or with an incorrect type, may cause an

explosion. Replace only with a CR2032 coin

type lithium battery. Dispose of used batteries

according to the manufacturer's instruction by

qualified service personnel.

EMC Notices

United States of America — FCC Part 15

This equipment has been tested and found to comply

with the limits for a class A Digital device, pursuant

to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference when the equipment is operated in a

commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction

manual, may cause harmful interference to radio

communications. Operation of this equipment in a

residential area is likely to cause harmful interference

in which case the user will be required to correct the

interference at his own expense.

Important: 

 Changes or modifications to this

equipment not expressly approved by Ross Video

Limited could void the user's authority to operate

this equipment.

Canada

This Class  “ A ”  digital apparatus complies with

Canadian ICES-003.
Cet appareil numérique de la classe  “ A ”  est

conforme a la norme NMB-003 du Canada.

iv

 • Document Information — Carbonite Black UltraChrome User Manual (v1.0)

Содержание UltraChrome HR
















































Отзывы: