Ross softGear, Руководство пользователя

Страница: 33 / 70

BAP User Guide (v1.0) Updating the Network Settings • 33
Updating the Network Settings
Once the BAP is communicating via DashBoard, it is recommended to assign a different static IP
address from the factory default values. These default values were used to initially establish a
connection point to the BAP, as outlined in your BAP Quick Start Guide . This chapter provides
instructions for configuring the RJ45 ports of the BAP for communication with your facility network
and streaming devices.
 Contact your IT Department for more information on changing these settings.
Network Connections to the BAP
There is one Ethernet port that must be configured on the BAP: Gb1 . This port enables the BAP to
interface with other devices in your facility, and the computer running the DashBoard client. After
the initial connection is established, DashBoard is used to update the network settings for the BAP
as determined by your IT Department and network requirements.

The Gb2 , NET1 , and NET2 ports are not implemented.
Updating the Gb1 Port Settings
Once the BAP is communicating via DashBoard, you may wish to assign a different static IP Address
from the factory default value (which was used to initially establish a connection point to the BAP).
To update the Gb1 port settings for the BAP
1. Display the Global interface as outlined in “ To display the BAP interfaces in DashBoard ”.
2. Select the Ethernet tab.
3. Select the Gb1 tab.
4. Click Edit .
The fields are now editable on the tab.
5. Use the DNS field to specify the IP address of the DNS server that the BAP will communicate
with.
6. Use the Method menu to specify Manual .
 Do not set Method to Unknown . This option is not implemented for the Gb1 port.
7. Use the Address field to specify the new static IP Address for the Gb1 port.
8. Use the Subnet Mask field to specify the subnet mask for the Gb1 port.
9. Use the Gateway field to specify the gateway for communications outside of the local area
network (LAN) the BAP will use.
10. Click Apply .
 The BAP automatically reboots and applies the changes.