Ross openGear GPI-8941 Series, Руководство пользователя

Страница: 60 / 92

60 • DashBoard Menus GPI-8941 Series User Guide (v9.0)
Default Values
Table 15.5 lists the default values for the video formats listed in the Timing Window Setup area of the Config tab.
Network Setup Tab
Table 15.6 summarizes fields in the Network Setup tab.
Remote Control Setup Tabs
The Remote Control Setup tab is organized into the following sub-tabs: RossTalk Client 1, RossTalk Client 2,
RossTalk Server, GPInet Server, and Serial I/O Port. This section summarizes each sub-tab.
RossTalk Client Tabs
You can configure up to two independent RossTalk Client connections. The options for each client are the same.
Table 15.5 Config Menu Default Values — Based on Type
Type Start Line Stop Line Fields
NTSC 66 197 Both
PAL 79 234 Both
1080i 141 422 Both
480p 132 394 N/A
576p 157 469 N/A
720p 188 563 N/A
1080p 282 844 N/A
All% 25 75 Both
Table 15.6 Network Setup Tab Items
Item Parameter Description
Addressing Mode Static User manually supplies the Ethernet settings. This is the
recommended setting.
DHCP* Automates the assignment of the Ethernet settings
IP Address ###.###.###.### The IP Address for the card
Subnet Mask ###.###.###.### The subnet mask for the card
Default Gateway ###.###.###.### The gateway for communication outside of the local
area network (LAN)
Apply Applies and saves any changes made on the Network
Setup tab
Cancel Changes are not applied to the Network Setup tab
Table 15.7 RossTalk Client Menu Items
Item Parameter Description
Connection Setup
Enable Selected Enables the card to use the RossTalk protocol to
communicate with an external device
Cleared* Disables the use of RossTalk protocol to communicate
with an external device