Ross openGear GPI-8941 Series Скачать руководство пользователя

Страница: 44 / 92

44 • Setting up Remote Control

GPI-8941 User Guide (v9.0)

3. Select the

RossTalk Client 1

tab located at the bottom of the

Remote Control Setup

tab.

4. Use the

IP Address

field to specify the IP Address of the external device to send the RossTalk message to.

5. Use the

TCP Port

field to specify the port the external device connects to.

6. Click

Test Connection

to open and close a connection to the external device without sending any messages.

To configure individual GPIs

1. In the

Individual GPI Setup

area, locate the row for the GPI you wish to configure for the message.

2. Use the

GPI Message

menu to select the type of message sent for that GPI. Choose from the following:

•

GPI On Trigger

— sends a GPI trigger message when the GPI goes from off to on.

•

GPI Off Trigger

— sends a GPI trigger message when the GPI goes from on to off.

•

GPI Level

— sends a GPI On message when the GPI goes from off to on and a GPI Off message when the

GPI goes from on to off. The GPI will also be automatically refreshed if the Refresh Period is not set to zero
(0).

•

No message

— does not send messages for the GPI.

3. Use the

field to specify a GPI identification string that is inserted in place of the <> in each GPI message.

Each ID can be up to 4 characters.

To configure the RossTalk message to send to an external device

1. If the

GPI Message

menu is set to

GPI On Trigger

GPI Off Trigger

a. Use the

GPI Trigger

field to send a GPI trigger message where <> is replaced by the GPI ID specified in

step 3 above.

b. Enter a message that is no longer than 32 characters.

2. If the

GPI Message

menu is set to

GPI Level

a. Use the

GPI On

and

GPI Out

fields to send as GPI Level messages where <> is replaced by the GPI ID

specified in step 3 above.

b. Enter a message that is no longer than 32 characters.

3. Use the

Message End

options to specify what is sent at the end of each GPI message. Refer to Table 6.7 on

page 7 for a list of options.

4. If the

GPI Message

is set to

GPI Level

, use the

Refresh Period

field to specify the number of seconds

between automatic refreshing of the GPI level messages.

Содержание openGear GPI-8941 Series





























































































Результаты поиска

Содержание openGear GPI-8941 Series

Отзывы:

Похожие инструкции для openGear GPI-8941 Series

Бренды по названию

Популярные бренды

Ross openGear GPI-8941 Series, Руководство пользователя

Результаты поиска

Содержание openGear GPI-8941 Series

Отзывы:

Похожие инструкции для openGear GPI-8941 Series

Бренды по названию

Популярные бренды