Ross openGear GPI-8941 Series, Руководство пользователя

Страница: 15 / 92

GPI-8941 Series User Guide (v9.0) Before You Begin • 15
Output Circuit Diagrams
This section provides simplified output circuit diagrams for the GPI-8941.
Figure 2.4 provides a simplified circuit diagram for contact closure outputs.
Figure 2.4 Simplified Circuit Diagram — Contact Closure Outputs
Figure 2.5 provides a simplified circuit diagram for voltage source outputs.
Figure 2.5 Simplified Circuit Diagram — Voltage Source Outputs
User Interfaces
Each card includes the following interfaces.

The GPI-8941 cards do not support DataSafe.
DashBoard Control System
DashBoard Control System enables you to monitor and control openGear frames and cards from a computer.
DashBoard communicates with other cards in the frame through the MFC-OG3-N or MFC-OGX-N. The
DashBoard software and manual are available for download from our website.
For More Information on...
• installing and using DashBoard, refer to the DashBoard User Manual .
• the available menus in DashBoard, refer to the chapter “ DashBoard Menus ” on page 57.
Card-edge Controls
The front-edge of each card features LED indicators for the power, and communication activity.
For More Information on...
• the card-edge LEDs, refer to the section “ Control and Monitoring Features ” on page 17.
TO
REAR MODULE
FROM OUTPUT
CARD CIRCUIT
0.5A
TO
REAR MODULE
FROM OUTPUT
CARD CIRCUIT
+5V WET
0.5A