Ross Master Control MC1-PANEL-16, Руководство пользователя, Страница: 48 / 58

48 • DashBoard Menus MC1-PANEL-16 User Guide (v4.0)
Product Tab
Table 8.2 summarizes the read-only information displayed in the Product tab.
Ethernet Tab
Table 8.3 summarizes the Ethernet options for setting up network communications for your MC1-PANEL-16.
Table 8.2 Product Tab Items
Item Parameters Description
Panel Name # Name of the MC1-PANEL-16 as specified in the Panel
Name, Permission tab
Product MC1-PANEL-16
Supplier Ross Video Ltd.
Board Rev ## Indicates the board issue
Serial Number ###### Indicates the board serial number
Software Rev #.# build ### Indicates the software and build versions
Firmware Rev ##.## Indicates the FPGA version number
Table 8.3 Ethernet Tab Items
Item Parameter Description
Ethernet 1
MAC Address
(read-only) ##:##:##:##:##:## The MAC Address for the MC1-PANEL-16 ethernet
port
Ethernet Status
(read-only) OK Ethernet communications for the Ethernet 1 port are
valid
Link Down Ethernet communications for the Ethernet 1 port are
invalid. The ethernet cable may be disconnected on the
port or the ethernet network may be down or
experiencing problems.
No IP Address The following conditions are occurring:
• The
Method is set to
DHCP
.
• The ethernet cable connected to the Ethernet 1 port is
connected.
• A valid IP Address could not be obtained. The DHCP
server may be down or is still powering up after a
power outage.
Current DIP Switch
(read-only) User Settings •
SW1
is
UP
and
SW2
is
UP
• enables a custom user configuration via DashBoard
using the options in the Ethernet tab
• this is the DIP Switches default setting
DHCP •
SW1
is
UP
and
SW2
is
DOWN
• MC1-PANEL-16 network settings are automatically
assigned using DHCP
Factory 1 •
SW1
is
DOWN
and
SW2
is
UP
• IP address is set to 192.168.2.10
• Subnet Mask is set to 255.255.255.0