Ross Master Control MC1-PANEL-16, Руководство пользователя, Страница: 38 / 58

38 • Operation MC1-PANEL-16 User Guide (v4.0)
› The middle row includes mnemonics that display
› The bottom row of buttons, labeled
Key 1-4 , are used to add, or remove, the specified keyer to the next
transition. Selecting the button toggles the keyer on/off and selects/removes the keyer to the Preset Bus
respectively. Once the transition is executed, and depending on a Personality tab setting, the button(s) are no
longer lit in this row but are lit red in the top row.
2. Transition Type Buttons
The following Transition Type buttons are available (from left to right):
› (Cut) — Select this button to perform a cut transition from one source to the next or to cut to a squeeze
effect. This type can be combined with a squeeze effect.
› (V-Fade) — Select this button to perform a V-Fade transition from the Program source to Black to the
Preset source. The MC1-PANEL-16 fades down from one source to black and then transitions to the next
source. During a hot-punch transition, the video performs a CUT while the audio performs a V-Fade. This type
can be combined with a squeeze effect.
› (Cut-Fade) — Select this button to perform a cut to black, then fade up to the next source. This type can be
combined with a squeeze effect.
› (Cross Fade) — Select this button to perform a gradual fade from one source to the next. The
MC1-PANEL-16 performs a cross fade between sources. Note that this button is selected after performing a
factory default reset. This type can be combined with a squeeze effect.
› (Fade-Cut) — Select this button to fade from one source to black and then cut to the next source. This type
can be combined with a squeeze effect.
› (SqueezeBack) — Select this button to perform a SqueezeBack effect by reducing the size of the video
over time to the dimensions set in the Squeeze Effects tab. Unlike the above types, you may not change your
background or keys on-air with this transition type. The corresponding buttons are grayed out.
3. Transition Speed Buttons
These buttons apply the rate (slow, medium, fast) to the next transition. The transition rates are specified in the
Home tab of the MC1-MK. Note that the
Slow
button is selected after performing a factory default reset.
4. FTB Button
Use this button to fade the Program bus to black. The Fade to Black (FTB) rate is specified in the Home tab.
After performing a factory default reset, this button is toggled off (unlit).
5. BKGD INCL Button
The
BKGD INCL
button is used to add, or remove, the BKGD from the next transition. Toggling this button will
immediately affect the Background video that is visible on the Preset output.
6. SQZ INCL Button
The
SQZ INCL
button is used to add or remove, the selected squeeze effect preset from the next transition.
Toggling this button will immediately affect the video that is visible on the Preset output. You may use this
button while a squeeze effect is on air to perform transitions within the squeeze effect. This can be done with a
Squeeze transition to perform a SqueezeBack, or as part of another transition (Take, Mix, Fade-Fade).
7. TAKE Button
Selecting the
TAKE
button performs the transition between the sources and effects selected in the Program and
Preset buses, using the specified Transition Type and Transition Speed . Refer to the previous sections for
information on the corresponding buttons in the Keyers Area.
For More Information on...
• setting the transitions rates, refer to the MC1-MK Operation Guide .