Ross Master Control MC1-PANEL-16, Руководство пользователя, Страница: 43 / 58

MC1-PANEL-16 User Guide (v4.0) Operation • 43
Figure 6.4 MC1-PANEL-16 — Audio Controls
1. AUDIO GAIN
Use the knob to apply an audio gain value on the Program and Preset bus. The gain range is -72dB to +12dB.
Press the knob to set the gain value to 0.
2. AUDIO OVER Buttons
An
AUDIO OVER
button is included on each bus. Selecting the button in the PST bus includes the voice over
channel in the next transition. You can also hot-punch the
AUDIO OVER
button in the Program bus.
Setting the Master Audio Level
The master audio level can be adjusted manually using the knob located next to the display on the
MC1-PANEL-16. This applies a gain (in dB), to the audio that is included with the output.
To set the Master Audio level
1. Press the applicable
Channel Select
button on the MC1-PANEL-16.
2. Rotate the knob clockwise to increase the gain, or counter-clockwise to decrease the gain.
3. Press the knob inward to set the audio gain to 0dB.
Performing Transitions
During transitions, the audio ramps smoothly between Program and Preset sources, matching the video transition.
All channels of enabled groups are processed, even though the final output level for only the first eight channels is
displayed on the Audio Meters.
Keep the following in mind when performing transitions including audio:
• A two-frame V-Fade is performed on the audio if a different source is hot-punched on the Program bus.
• Audio transitions are Mix or V-Fade (on video fade, and cuts). However, during cut transitions, the audio
transition is a V-Fade.
• Depending on how the Reset Audio Gain feature is configured, the audio gain level may be reset to 0dB after a
transition. Refer to the MC1-MK Installation Guide for details.
For More Information on...
• setting EAS audio, refer to the MC1-MK Installation Guide .
Voice Overs
The MC1-PANEL-16 enables flexible audio/voice over mixing with a variable program audio duck level, audio
over gain control, and preset mixing with transition control.When Voice Over or EAS is active, all channels are
1) AUDIO GAIN 2) AUDIO OVER Buttons
AUTO
ON
EFF
SEL
KEY 1 KEY 2 KEY 3 KEY 4
AUDIO
OVER
KEY 1 KEY 2 KEY 3 KEY 4
SLOW MEDIUM FAST
AUDIO
OVER
BKGD
INCL
SQZ
INCL
TAKE FTB
SHIFT
SHIFT
PROGRAM
TRANSITION RATE TRANSITION TYPE
PRESET
PGM AO PROGRAM KEY SELECT
PRESET KEY SELECT PST AO
TRANSITION
CH3
Eff4 ONAIR GAIN: 0
FTB
AUDIO
OVER
AUDIO
OVER
PGM AO
PST AO