Ross Master Control MC1-PANEL-16 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 58

Ross Master Control MC1-PANEL-16 Скачать руководство пользователя страница 23

MC1-PANEL-16 User Guide (v4.0)

Using DashBoard • 23

Using DashBoard

Once you install the MC1-PANEL-16, you can access its interfaces in DashBoard. These interfaces provide options
for configuring, monitoring, and operating your card in DashBoard.

Navigating to the Configuration Interface

This section provides a brief overview of navigating to the Configuration interface of the MC1-PANEL-16.

To launch DashBoard

1. Ensure that you are running DashBoard software version 6.2.0 or higher. The software and

DashBoard User

Guide

are available from the Ross Video website.

2. Launch DashBoard by double-clicking its icon on your desktop.

3. Locate the MC1-PANEL-16 in the

Tree View

of DashBoard. If the MC1-PANEL-16 node does not appear,

consult the

DashBoard User Guide

.

To display the Configuration interface

1. From the

Tree View

, expand the node for the MC1-PANEL-16 you wish to access.

2. Select the

Configuration

node to display the interface in the right-half of DashBoard.

«
...
21
22
23
24
25
...
»

Содержание Master Control MC1-PANEL-16



























































Отзывы:

Нет отзывов