The Miro name, logo, and icon are trademarks of the Participatory Culture Foundation (PCF).
VMware, the VMware logo, VMware Cloud Foundation, VMware Cloud Foundation Service, VMware vCenter Server,
and VMware vSphere are registered trademarks or trademarks of VMware, Inc. or its subsidiaries in the United States
and/or other jurisdictions.
SEGA and the SEGA logo are either registered trademarks or trademarks of the SEGA Holdings Co., Ltd or its affiliates.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.
FCC Compliance and User Information
The following information has been provided to clarify FCC requirements for operation of this device. These
requirements are found in the FCC rules for radio frequency devices, Part 15.
Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his or her own expense.
Important - Modifications & Shielded Cables
Changes or modifications to this product not authorized by Ross
®
Video Limited could void the FCC Compliance and
negate authority to operate the product.
This product was tested for FCC compliance under conditions that included the use of Ross
®
Abekas
®
peripheral devices
and Ross
®
Abekas
®
shielded cables and connectors between system components. It is important that Ross
®
Abekas
®
peripheral devices are used, and shielded cables and connectors are used between system components to reduce the
possibility of causing interference to radios, television sets, and other electronic devices. Ross
®
Abekas
®
peripheral
devices and the properly shielded cables and connectors can be obtained directly from Ross
®
Abekas
®
, or through a
Ross
®
Abekas
®
-authorized dealer.
Safety and First Aid
Ross
®
Abekas
®
equipment is designed to the highest standards of quality and reliability. However, no matter how these
systems are designed, operators and maintenance personnel can be exposed to electrical shock hazard when protective
covers are removed for maintenance or the installation of options. With this caution in mind, each operator and engineer
must observe all safety regulations, and have a clear understanding of first aid procedures related to electrical hazards.
Safety and Compliance Certifications
Power Information
To ensure safe operation and to guard against potential shock or risk of fire, ensure your AC power source for the system
is within the required voltage range and frequency.
Operating Environment
The optimum operating environment is within the following ranges:
• Recommended Operating Temperature:
• Recommended Operating Humidity: 20% to 80% non-condensing
iv
• Document Information — Tria+ UHD User Manual
