To Record a New Clip
Use a channel transport to record the video signal coming into the server.
Note:
You cannot record a separate key video + alpha channel. You can only import clips with key video and alpha channels.
1.
Select the channel transport that you want to record a clip to. This is the channel for the BNC on the back of the
server that the audio/video you want to record is coming in on. Not all channels will have an associated input BNC,
depending on the model and configuration of your server.
2.
Eject any clip that may already be loaded into the channel transport.
3.
Click the record button ( ).
The
Clip Record Setup
dialog box is shown.
4.
In the
Record Type
area, select the type of recording you want to do.
•
New Clip (Record After Arming)
— arms the channel transport for recording a new clip.
5.
In the
Record Tracks
area, select which tracks you want to record.
Note:
Audio is recorded depending on how the Audio Input Source is set in
Tria Config
.
•
Video
— record the video and any embedded audio coming into the Video In BNC, depending on the audio
source.
•
Audio
— record the digital audio coming into the AES ports or the embedded audio on the Video In BNC,
depending on the audio source.
6.
In the
New Clip
area, enter a name for the clip in the
Clip Name
field.
Tip:
If you want to record the clip into a sub-folder on the media drive you must include the folder path with the new. For example,
1080p Clips\Downtown-Fire
records the clip
Downtown-Fire
in the
1080p Clips
folder. The folder must
already exist in the Clip Library to be able to record to it.
7.
Enter an 8-charater id for the clip in the
Clip ID
field.
If you are controlling the server from an external device, the clip id is used on the external device to load a clip. If
you do not assign a clip id to the clip, the first 8 characters of the clip name can be used.
18
• Channel Transport Control — Tria+ UHD User Manual
