RosRoca Olympus Mini, Руководство по обслуживанию

Страница: 71 / 110

SCHeduLed MAINTeNANCe
6‑3
OM1R-SM-GB01R
6 Scheduled maintenance
6.1 Introduction
The refuse collection mechanism and waste
container lifting device should be serviced only by
skilled engineers who have received the approved
Ros Roca S.A. training and who are fully conversant
with its operation and safety procedures.
6.2 Operational maintenance
It is important that your machine is kept in good
working order. Before the vehicle is put into service,
carry out the inspection procedure ‘Daily safety
checks’ as specified in Chapter 3 ‘Daily checks’ of
this Manual to confirm the correct operation of the
machine, its controls, safety circuits and interlocks.
Make sure that there is no mechanical damage or
wear evident in the refuse mechanism especially in the
pivoting and locking of the tailgate to the body.
Any problems must be reported to supervision
immediately.
6.3 Routine maintenance
To maintain the mechanism at peak operational
efficiency and good condition:
• The refuse collection mechanism and waste
container lifting device should be serviced
according to the procedures and at the
intervals specified in this chapter.
• Only approved lubricants, fluids and
replacement parts must be used when
servicing the vehicle as specified in Chapter 8
‘General specification data’ of this Manual.
• If the vehicle is being operated in Great Britain,
the lifting device mechanism, its components
and any associated accessories such as hooks,
shackles, slings, etc. should be inspected every
6 months by a ‘competent person’ to meet the
requirements of the Lifting Operations and
Lifting Equipment Regulations 1998 (LOLER).
• If the vehicle is being operated in countries
outside Great Britain, the lifting device
mechanism should be inspected in accordance
with prevailing local legislation governing
inspection and maintenance of such
equipment.
Failure to comply with maintenance schedules
and procedures could result in loss of
efficiency, damage and premature wear.
6.4 warnings
wARNINGS:
IT IS THe ReSPONSIBILITY OF THe
TeCHNICIAN TO COMPLY wITH ALL THe
ReLeVANT SAFeTY PReCAuTIONS ANd
PROCeduReS LISTed IN CHAPTeR 2
‘HeALTH ANd SAFeTY’ OF THIS MANuAL
AS weLL AS ALL PReVAILING SAFe
SYSTeMS OF wORK, HeALTH ANd SAFeTY
ReGuLATIONS, wORKSHOP ReGuLATIONS
ANd wORKSHOP COdeS OF PRACTICe
wHeN CARRYING OuT THe PROCeduReS
deSCRIBed IN THIS MANuAL.
6