RosRoca Olympus Mini Скачать руководство пользователя страница 40

Страница: 40 / 110

Open system vehicles:

•

Vehicles not fitted with light curtain.

•

Vehicles fitted with light curtain and folding rave
rail in lower position.

57. Press and release the ‘Start pack cycle’ push‑

button.

• Packer plate should open and then stop.

4552-OM1-R-GB-G1

4577-OM1-R-GB-G1

58. Press and hold the ‘Start pack cycle’ push‑button.

4552-OM1-R-GB-G1

4573-OM1-R-GB-G1

• Carriage plate and packer plate should move

downwards.

59. Release the push‑button while the carriage plate

and packer plate are moving downwards.

• Carriage plate and packer plate should stop

immediately.

60. Press and hold the ‘Start pack cycle’ push‑button

again.

• Carriage plate and packer plate should

continue to move fully downwards from
stopped position and then stop when carriage

plate fully lowered.

61. Press and hold the ‘Start pack cycle’ push‑button

again.

• The packer plate should close.

Release the push‑button after the packer plate has
started to close.

• Packer plate should automatically close and

then the carriage plate and packer plate

should move upwards until the compaction
mechanism is fully packed when it should stop.

4574-OM1-R-GB-G1

62. Press the ‘Signal’ push‑button.

• ‘Tailgate signal’ buzzer in the cab should

sound immediately the push‑button is pressed
and silence immediately the push‑button is
released.

4549-OM1-R-GB-G1

• The ‘Signal’ warning pictogram should display

on the control panel screen while the button is
pressed.

dAILY CHeCKS

3‑16

OM1R-SM-GB01R

Содержание Olympus Mini















































































































Результаты поиска

Содержание Olympus Mini

Отзывы:

Бренды по названию

Популярные бренды

RosRoca Olympus Mini, Руководство по обслуживанию

Результаты поиска

Содержание Olympus Mini

Отзывы:

Бренды по названию

Популярные бренды